Finisar FTLX1371D3BCL: 10G SFP Plus MM 1310nm 220m LC connector. Compatible Finisar, Matches to SFP-10G-LRM.
Finisar’s FTLX1371D3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 220m over Multi Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3 aq 10GBASE-LRM. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
The FTLX1371D3BCL is a “linear module” i.e. it employs a linear receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host board EDC PHY with a linear receiver SFP+ module.
The transceiver is RoHS compliant and lead-free per Directive 2011/65/EU, and Finisar Application Note AN-2038.
Hot-pluggable SFP+ footprint
Supports 10.3Gb/s 10GBASE-LRM bit rate
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Commercial temperature range -5°C to 70°C
Single 3.3V power supply
Maximum link length of upto 220m
Uncooled directly modulated Fabry-Perot (FP) laser at 1310 nm
Receiver linear electrical interface
Duplex LC connector
Built-in digital diagnostic functions
10GBASE-LRM 10G Ethernet
Legacy FDDI multimode links
|Protocol||10 Gigabit Ethernet Compliant|
|Data Rate (max)||10.3 Gb/s|
|Low End Case Temperature (°C)||-5°C|
|High End Case Temperature (°C)||70°C|