Finisar FTLX1471D3BCL: 10G SFP Plus SM 1310nm 10km LC connector. Compatible Finisar, Matches to SFP-10G-LR.
Finisar’s FTLX1471D3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber.
They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
The FTLX1471D3BCL is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module.
The transceiver is RoHS compliant and lead free per Directive 2011/65/EU, and Finisar Application Note AN-2038.
Hot-pluggable SFP+ footprint
Supports 9.95 to 10.5Gb/s bit rates
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Commercial temperature range -5°C to 70°C
Single 3.3V power supply
Maximum link length of 10km
Uncooled 1310nm DFB laser
Receiver limiting electrical interface
Duplex LC connector
Built-in digital diagnostic functions
10GBASE-LR/LW 10G Ethernet
1200-SM-LL-L 10G Fibre Channel
|Protocol||10 Gb/s Fibre Channel Compliant
10 Gigabit Ethernet Compliant
|Data Rate (max)||10.3 Gb/s|
|Low End Case Temperature (°C)||-5°C|
|High End Case Temperature (°C)||70°C|