Finisar FTLX1671D3BCL: 10G SFP Plus SM 1550nm 40km LC connector. Compatible Finisar, Matches to SFP-10G-ER.
Finisar’s FTLX1671D3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 40km over single mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-ER/EW, and will also support 8.5Gb/s Fibre Channel data rate traffic without requiring rate-select.
The FTLX1671D3BCL incorporates advanced CMLTM technology, and is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
The fiber transceiver is RoHS compliant and lead free per Directive 2011/65/EU, and Finisar Application Note AN-2038.
Hot-pluggable SFP+ footprint
Supports 9.95 to 10.3Gb/s and 8.5Gb/s bit rates
Power dissipation < 1.5W; Typical <1W
RoHS-6 compliant (lead-free)
Commercial temperature range 0°C to 70°C
Single 3.3V power supply
Maximum link length of 40km
1550nm cooled CMLTM technology
Receiver limiting electrical interface
Duplex LC connector
Built-in digital diagnostic functions
10GBASE-ER/EW 10G Ethernet
8G Fibre Channel Rate Support
|Protocol||10 Gigabit Ethernet Compliant
8 Gb/s Fibre Channel Compatible
|Data Rate (max)||10.3 Gb/s|
|Low End Case Temperature (°C)||-5°C|
|High End Case Temperature (°C)||70°C|